Closed Type Water Cooling System

Water Cooling System Parameter

Furnace (T)	Power (KW)	Cooling water flow (T)	Pump power (KW)	Pump head(M)	Inlet diameter (mm)	Outlet diameter (mm)	Water volume (m3)	Cooling water flow(T)	Pump power (KW)	Pump head (M)	Inlet diameter (mm)	Outlet diameter (mm)	Water volume (m3)
0.05	100	5	2.2	32	DN40	DN50	10	7	2.2	32	DN40	DN50	14
0.1	175	6	2.2	32	DN40	DN50	12	8	2.2	32	DN50	DN65	16
0.15	220	7	2.2	32	DN40	DN50	14	10	3	32	DN50	DN65	20
0.25	310	7.5	2.2	32	DN60	DN65	15	15	4	32	DN65	DN80	30
0.5	400	8	2.2	32	DN50	DN65	16	20	4	32	DN65	DN80	40
0.75	600	9	3	32	DN50	DN65	18	30	5.5	32	DN65	DN80	60
1	800	10	3	32	DN50	DN65	20	40	7.5	32	DN80	DN100	80
1.5	1200	15	4	32	DN65	DN80	30	60	11	32	DN80	DN100	120
2	1600	20	4	32	DN65	DN80	40	80	15	32	DN100	DN125	160
2.5	2000	25	5.5	32	DN65	DN80	50	100	15	32	DN100	DN125	200
3	2500	30	5.5	32	DN65	DN80	60	125	22	32	DN125	DN150	250
3T-60T IF specific cooling requirements please contact with our company. we will make the best scheme according to the actual situation.
Above parameters only for reference, the equipment changes according to the actual situation, please contact with the sales manager.

Water Cooling System Work Principle

Pure water in closed type water cooling system for copper coil within cycle, the working fluid heat flow through the coil by coil scattered into the water, at the same time units around the outside the normal temperature air from the air inlet grille into the chassis, and the water flow in the opposite direction, upward flow through the coil,a small portion of water evaporation and heat, saturated hot humid air from the top of the cooling tower fan discharge to the atmosphere, the remaining water into the bottom water disk, the water pump is recycled to the water distribution system and spraying to coil, in order to reduce the temperature of the fluid inside the pipe all kinds of. Hot air of water box not evaporation of the water is water retaining plate interception and through the PVC heat exchange layer, PVC heat exchange layer in which the water is flowing in the air cooling, temperature is decreased. Fall into the water by the water pump bottom plate, is recycled to the water distribution system, back to pour into the coil, so for circulating cooling. This equipment widely used in induction furnace cooling, cold rolling mill, continuous casting cooling, etc.

Water Cooling System Work Digram

Water Cooling system Mainly used in casting /forging/smithing /heat treatment and machinery cooling

• Fully enclosed circulating cooling, eliminate the pipeline jams caused by debris.
• Use soft water circulating cooling; no overheat damage of power supply, silicon control, capacitor, IGBTmodule, induction coil caused by incrustation.
• No need of water pool and cooling tower, occupies small area, and moves easily.
• High cooling efficiency and low operate cost.
• Low water consumption, meet requirement of environment protection

 

Water Cooling System Components

Access Door

Air-inlet grille

Spray Header

Spray tube

Spray Pump

Power Supply Cabinet

Draught fan

Water Pump for water tank