Desktop Laser Welder
Laser Welding Machine for Jewelry Repairing
More Details of Desktop Laser Welder
The jewelry desktop laser welder is used to repair jewelry through the use of lasers. The beam provides a concentrated heat source, allowing for narrow, deep weld and high weld quality. As a result of its compact size, it is widely used in the jewelry industry.
It is suitable for repairing gold, silver, K-gold, platinum, stainless steel and titanium. Widely used to repair rings, pendants, necklaces, etc.
There is an air cooling system and a water tank present within the welding machine that helps prevent the machine from overheating, about 4 to 5 liters of clean water is needed. With this, the laser machine can work continuously for 24 hour. The welding machine is affordable, requires minimal power consumption and it is easy to maintain.
Get Price of Desktop Laser Welder
Features of Desktop Laser Welder
Laser welding has fast speed, large depth, precise positioning, and small material deformation
It can weld refractory materials such as titanium, quartz, etc., and can weld heterogeneous materials with good results.
Micro welding is possible. It can be used in the assembly welding of micro and small workpieces in mass automated production.
Details of Desktop Laser Welder
- The desktop laser welder comes with a built-in microscope, it offers clear and crisp viewing of what is going on in the chamber. You can easily monitor your work and track your progress.
- This desktop laser welder is small and compact- designed specifically for smaller spaces. It comes with a decent opening, meaning you will still be able to work on bigger jewelry pieces.
- The jewelry laser welder has an air cooling unit that keeps the temperature in check, in order for it to work continuously for long hours.
- The laser wavelength is 0.3- 20nm and a maximum power pulse of 30J. The resulting weld is considerably stronger than a traditional solder joint.
- It has a spot diameter of 0.2mm that is a lot stronger, more intense and precise. With this specification, it offers a longer duty cycle and a lot more power for jewellers to work with.
- The jewelry desktop laser welder weighs 75kg, this makes it easy to move, set up and easy to maintain.
- You can place the desktop laser welder on any elevated platform for your convenience. The comfortable, ergonomic design with convenient user controls and display, ensure optimal utilization with minimal operator fatigue.
- The spot size can easily be adjusted based on material and type of jewelry. The welding spot is flat and beautiful, there is no need for excessive post-weld treatment.
- Fast welding speed, high quality welding, non-polluting solder joints, precise positioning, no damage of surrounding jewelry during welding are part of the unique feature of the jewelry laser welding machine.
- The jewelry desktop laser welder allows you to weld jewelry parts as fast as possible. Once the parameters are set and the weld spot is tested, welding can begin.
| Model number | SPB-LWM |
| Voltage | 1 phase 220v 50 30 A |
| Laser wavelength | 0.3-20 nm |
| Pulse Width | 0.3-20 ms |
| Pulse frequency | 1-10 HZ |
| Minimum Spot diameter | 0.2mm |
| Laser power | 200W |
| Maximum single pulse energy | 30J |
| Aiming and positioning | microscope |
| Cooling method | Air-cooled |
| Dimension | 105*60*70cm |
| Weight | 75 kg |
Any Question About SuperbMelt Desktop Laser Welder
Superbmelt’s professional technical team and sales team are at your service
(7/24hours service)
© Copyright 2008-2021 Superb Electromachinery Co., Limited